By RJ45 SFP 1.25G Copper Ethernet Transceiver  , Pluggable Cisco Copper Gbic Module

Copper SFP 1000M Copper-T SFP GLC-TE 100M Compatible with Cisco

Features

Ø Up to 1.25Gb/s bi-directional data links

Ø Hot-pluggable SFP footprint

Ø Fully metallic enclosure for low EMI

Ø Access to physical layer IC via 2-wire serial bus

Ø TX Disable and RX Los/without Los function

Ø Compact RJ-45 connector assembly

Ø Low power dissipation (1.05 W typical)

Ø 1000 BASE-T operation in host systems with SERDES interface

Ø Operating case temperature range of

              0°C to +70°C (Commercial)

              -20°C to +85°C (Extend)

Applications

Ø Fiber Channel

Ø Gigabit Ethernet

Ø Router/Server interface

Ø Switch to Switch interface

Ø Switched backplane applications

Ø Other optical transmission systems

Description

linkopto`s RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Quality Control

Package

Related Product List