|
Product Details:
|
| Product Name: | Copper-T SFP Transceiver | Model Name: | SFP-T-R |
|---|---|---|---|
| Data Rate: | 1000Base | Transmission Distance: | 100M |
| Connector Type: | RJ45 Connectors | Working Environment: | Commercial 0~70℃ |
| Compatibility: | Juniper Equipment | DDM: | No |
| High Light: | copper sfp transceiver,10g rj45 transceiver |
||
Copper SFP 1000M Copper-T SFP RJ45 100M Compatible with Juniper
The Gigabit RJ45 Copper SFP transceiver (mini-GBIC) is built to comply with MSA standards to provide a cost-effective to add, replace or update an Ethernet copper port on its networking equipment.
With Auto-negotiation 10/100/1000 Mbps at distances up to 100 meters, this Ethernet SFP transceiver can be installed on network devices with fiber SFP MSA compliant port. Delivering convenience and scalability, this copper SFP transceiver is fully hot pluggable, allowing you to install the module without disrupting network traffic or rebooting the device.
Features
Ø Up to 1.25Gb/s bi-directional data links
Ø Hot-pluggable SFP footprint
Ø Low power dissipation (1.05 W typical)
Ø Fully metallic enclosure for low EMI
Ø Compact RJ-45 connector assembly
Ø Access to physical layer IC via 2-wire serial bus
Ø TX Disable and RX Los/without Los function
Ø 1000 BASE-T operation in host systems with SERDES interface
Ø Operating case temperature range of
0°C to +70°C (Commercial)
-20°C to +85°C (Extend)
Applications
Ø Fiber Channel
Ø Gigabit Ethernet
Ø Switch to Switch interface
Ø Router/Server interface
Ø Switched backplane applications
Ø Other optical transmission systems
Description
Linkopto Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.
Linkopto module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.
The SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Quality Control
Related Compatible List
| Item No. | Description |
| SFP-BX-53-L10 | SFP 10km TX1550nm/RX1310 1.25G DDM LC connector |
| SFP-BX-35-L10 | SFP 10km TX1310nm/rx1550 1.25G DDM LC connector |
| SFP-GE-T | RJ45 SFP 10/100/1000 mb/s, 100m (UTP RJ45 |
| SFP-BX-53-S20 | SFP 20km TX1550nm/RX1310 1.25G DDM SC connector |
| SFP-BX-35-S20 | SFP 20km TX1310nm/rx1550 1.25G DDM SC connector |
Contact Person: Mr. Will
Tel: 89-13360069787
Fax: 86--23357705
